> Project registry

Research projects of the German institutions for statutory accident insurance and prevention

Nephrotoxicity of donarit
: Project-Nr. BG01#023
Assessment of the deployment of a hammer device in mine rescue training from a biomechanical point of view relative to strain on the lumbar vertebral column
: Project-Nr. BG01#024
The influence of electromagnetic fields on explosive equipment
: Project-Nr. BG02#001
Development of new models to organise internal company work protection systems and their interfaces to the general work protection system in companies operating in the new federal Laender in areas covered by the mechanical engineering and metalworking industry-BG
: Project-Nr. BG06#004
Health reporting and promotion in small businesses in the metal industry
: Project-Nr. BG08#009
Heidelberg dioxin study
: Project-Nr. BG09#001
Investigation of fall geometry and the expected strains on the human body when falling whilst wearing safety harnesses and development of a catching harness, the wearing of which is more readily accepted
: Project-Nr. BG10#014
Incidence of tumours in animal tests
: Project-Nr. BG10#016
Drawing up a programme for the numerical simulation of electrophysiological processes in heart muscle cells
: Project-Nr. BG10#017
Development of a catching harness with a higher degree of acceptance
: Project-Nr. BG10#018
Epidemiological investigation into the question of a possible risk of cancer through contact with cooling lubricants
: Project-Nr. BG10#020
The influence which the chronic exposure of rats to an alternating 50-Hz-magnetic field has on activating immunological response in their lymphocytes
: Project-Nr. BG10#021
Investigations into protection from explosion when using cooling lubricants in machine tools
: Project-Nr. BG10#029
Strains and effects of exposure of gem cutters to metal compounds
: Project-Nr. BG10#030
Computer simulation of the spread of heart muscle stimulation
: Project-Nr. BG10#031
Analysis of gases and vapours in the rubber industry, part II
: Project-Nr. BG11#011
Development of a gaschromatography measurement technique for determining the content of hexane in the air at the workplace
: Project-Nr. BG18#004
Investigating skin diseases and the effectiveness of means of skin protection
: Project-Nr. BG18#023
Measurement of aerosol and particle size distribution in order to assess health damaging effects and filter system designs
: Project-Nr. BG18#026
Analysis of substances contained in flour with GC/MS; HPLC/MS - determining of pesticide residues
: Project-Nr. BG18#027
Constructing an explosion protection expert system
: Project-Nr. BG18#028
Study of the situation regarding symptoms and spinal strain in the bakery trade
: Project-Nr. BG18#030
Spectral Elektromyografie(EMG)-mapping in the lumbar region and EMG-polygraphy of the functionally important trunk muscles during systematised lifting tests
: Project-Nr. BG18#031
Methodical investigation concerning the application of spectral elektromyografie (EMG)-mapping and seating area pressure distribution at computer screen work places
: Project-Nr. BG18#032
Quantitative analysis of strain factors when lifting and carrying from defined reference movements
: Project-Nr. BG18#033
Topography of the activation of the lumbar back muscle system at the computer screen workplace
: Project-Nr. BG18#034
Spectral EMG-mapping, surface EMG-polygraphy, movement analysis and determining ground unit stress during systematised lifting test with defined trial groups with and without back support belts
: Project-Nr. BG18#035
Comparative analysis of different methods for quantifying strain during lifting and carrying
: Project-Nr. BG18#036
Developing a programme for skin protection training in small companies
: Project-Nr. BG18#037
Model plan for determining occupational health risks in the meat industry
: Project-Nr. BG19#004
Occupational strain and appearance of musculo skeletal attrition in bricklayers in comparison with joiners and painters and decorators: a combined orthopaedic, epidemiological, occupational scientific and bio-mechanical longitudinal study
: Project-Nr. BG21#001
Establishment of a model for integrated regional work protection (MIRA)
: Project-Nr. BG21#002
Older employee risk groups in the construction industry - level 1 - influence of age on the incidence of accidents
: Project-Nr. BG26#004
Training profile and pilot seminar for safety co-ordination corresponding to building site directive 92/57/EEC
: Project-Nr. BG27#003
Conditions and concepts for qualifying and testing the arrangement of a user-friendly workplace in tunnel construction (model plan tunnel construction teaching and test institute)
: Project-Nr. BG28#012
Joint project "implementation of DIN/ISO 9000 ff for the introduction of quality assurance systems in small and medium sized companies" part project "construction industry - working party E: environment and work protection"
: Project-Nr. BG28#018
Improving working conditions in the building industry; development and testing of new forms of organisation and co-operation
: Project-Nr. BG28#024
Accompanying test of hygienically relevant micro-organisms during soil redevelopment on the site of the Sächsische Olefinwerke AG in Böhlen
: Project-Nr. BG28#028
Elaboration of activity instructions for applying the EU- building site directive during the planning and carrying out of underground building work
: Project-Nr. BG28#030
Analysis and assessment of reaction products from explosives on shooting with hand guns at shooting ranges
: Project-Nr. BG31#003
Work place safety and health protection in the inland waterway transport system
: Project-Nr. BG35#004
Rehabilitation of hairdressers with eczema of the hands
: Project-Nr. BG36#002
Prevention of skin diseases in the hairdressing profession - Part plan 3: secondary individual prevention in hairdressing companies
: Project-Nr. BG36#008
Prevention of accidents on the way to or from work or when travelling on work-related business in medical/dental practices
: Project-Nr. BG36#032
Prevalence of spinal complaints with office employees - a cross-sectional study
: Project-Nr. BG36#036
Prevention of accidents on the way to or from work or when travelling on work-related business in veterinary practices
: Project-Nr. BG36#037
Prevention of accidents on the way to and from work and accidents while travelling on work-related business in outpatient health and social care services
: Project-Nr. BG36#038
Requirements for multi-purpose controls (joysticks)
: Project-Nr. BGAG0100
Economic loss caused by business disruption
: Project-Nr. BGAG7600100604
Accident prevention
: Project-Nr. BGAG7600100644
Evaluation of the readability of standard letters by the BGs to insured individuals
: Project-Nr. BGAG7600100728
Development of prevention targets
: Project-Nr. BGAG7600100729
Evaluation of an advertising campaign for insured businesses
: Project-Nr. BGAG7600100736
Online survey for statistical measurement of reductions in performance/disablement and the employment of affected individuals
: Project-Nr. BGAG7600100770
The influence of head-up displays upon driving behaviour
: Project-Nr. BGAG7600100775
Assessment of the model assembly workplace for older employees
: Project-Nr. BGAG7600100822
IGAcheck for work related occupational demands, stresses and strains, hazards
: Project-Nr. BGAG7600100824
The suitability of findings from advertising for transfer to prevention activity
: Project-Nr. BGAG7600100826
"My next occupation": personnel development for occupations of limited duration
: Project-Nr. BGAG7600200695
QdP Management Organization Coordination
: Project-Nr. BGAG480006
Creation of a system of workplace types and analysis of them in terms of reduced performance
: Project-Nr. BGAG480019
Study of a pictogram for the marking of fall arresters in horizontal use
: Project-Nr. BGAG480020
Evaluation of an electronic instruction system
: Project-Nr. BGAG480037
Validation of a quick check for measurement of mental stress among teachers (based upon the BAAM procedure)
: Project-Nr. BGAG480047
The effects of prevention campaigns: effectiveness and benefits
: Project-Nr. BGAG480053
Evaluation of the BGV A2
: Project-Nr. BGAG480299
iga: My next occupation - personnel development for occupations of limited duration
: Project-Nr. BGAG484004
IGAcheck for working-conditioned demands, charges and dangers
: Project-Nr. BGAG484009
IGA scope for transfer of findings from advertising to prevention
: Project-Nr. BGAG484010
Literature study to the heart rate variability
: Project-Nr. BGAG490000
Evaluation of highway posters by look movement analyses
: Project-Nr. BGAG490001
"On The Right Foot": assessment of behavioural change among participants in short training courses
: Project-Nr. BGAG7600100614
Mental stress and stress prevention among female sales staff in meat-processing businesses
: Project-Nr. BGAG7600100608
Exposure to hand-arm vibration caused by woodworking machines
: Project-Nr. BGAG7600100620
Barrier-free Internet: analysis of eye movement during Internet use by older employees
: Project-Nr. BGAG7600100611
Combination of the MTM method and ergonomic assessment of the work process
: Project-Nr. BGAG7600100653
Epidemiological intervention study: reduction in accident frequency - evaluation of integral consultation approaches
: Project-Nr. BGAG7600100645
Evaluation of stress-prevention training
: Project-Nr. BGAG7600100615
Identification of changes in circumstantial prevention in companies in conjunction with the BGs
: Project-Nr. BGAG7600100618
On The Right Foot: development of a model for the origin of tripping, slipping and falling accidents
: Project-Nr. BGAG7600100612
Performance of a long-term study into the effectiveness of activities conducted by OH&S professionals
: Project-Nr. BGAG7600100643
Quality in prevention - effectiveness and efficiency of the prevention services of the BGs
: Project-Nr. BGAG7600100700
Scale, importance, and relevance to companies of mental stress at work
: Project-Nr. BGAG7600100609
The effects of modern management strategies upon employee health
: Project-Nr. BGAG7600100654
Analysis and assessment of loads and strains during construction work as determinants of typical occupational back complaints in concrete workers and plasterers
: Project-Nr. BGBA#004
Multi-disciplinary cross sectional study on the effects of exposure to typical occupational work materials on the health of painters long employed in the trade
: Project-Nr. BGBA#012
Biomonitoring after exposure to polycyclic aromatic hydrocarbons and other residues of combustion
: Project-Nr. BGBA#015
Risk group older employees in the construction industry - level II - inability to work and incapacity in selected construction industry jobs
: Project-Nr. BGBA#016
Investigation of the tear-off behaviour of hand-vacuum lifters for plates of glass
: Project-Nr. BGBA#018
The ergonomic development and creation of selected tools for floor tiling work
: Project-Nr. BGBA#020
Epidemiological follow-up study on cancer mortality in arc welders exposed to chrome-nickel
: Project-Nr. BGEM#015
Investigations into the production of dangerous substances during inert gas metal arc welding of nickel and nickel based alloys
: Project-Nr. BGEM#017
Risks of cancer through welding smoke containing chromate- and nickel
: Project-Nr. BGEM#018
Investigation and analysis of spinal strain based on occupational groups from the metal industry
: Project-Nr. BGEM#019
Investigation into the characterisation of emissions during the welding of coated metal sheets in shipbuilding
: Project-Nr. BGEM#024
Isolation and elimination of MHC II-glycoproteins from antigen presenting cells
: Project-Nr. BGFAALL004A
Isolation and characterisation of occupational allergens taking into particular consideration substances of low molecular weight
: Project-Nr. BGFAALL006
Latex allergies - standardization of the allergen quantification in products and air samples obtained from the workplaces and the prevention of the hypersensitivity reaction due to latex
: Project-Nr. BGFAALL007
Creation of a tissue archive at the BGFA
: Project-Nr. BGFAEPID/MOL001
The effects on health of chronic dust exposure
: Project-Nr. BGFAEPID002
Occupational diseases at the mansfield copper mining industry
: Project-Nr. BGFAEPID/MED010
Creation of a tissue archive at the BGFA
: Project-Nr. BGFAEPID/MOL001
Cloning, isolation and characterisation of previously unknown occupational allergens including their epitopes
: Project-Nr. BGFAGEN004
Estimation of risk of cancer in specially exposed occupational groups by means of molecular biological methods
: Project-Nr. BGFAGEN007A
Diagnostic of microorganisms
: Project-Nr. BGFAGEN011
Changes in immune cells after exposure to harmful substances at the workplace
: Project-Nr. BGFAIMM003
Manufacturing of monoclonal antibodies against defined occupational allergens
: Project-Nr. BGFAIMM005
Importance of different cell populations for the allergic reaction
: Project-Nr. BGFAIMM011
Application of non-invasive methods for differentiation of occupational allergic, chemical-irritative obstructive respiratory diseases and for assignment and differentiation of irritative and disturbing effects of hazardous substances
: Project-Nr. BGFAIMM015
Measures for occupational safety and health to prevent infections for working people in poultry processing plants
: Project-Nr. BGFAMED016
Bronchial Challenge Tests with Isocyanates
: Projekt-Nr. BGFAMED019
Comparison of the methacholine challenge recommended for prevention with an internationally recommended test
: Project-Nr. BGFAMED020
Respiratory symptoms due to endotoxines in the textile industry
: Project-Nr. BGFAMED/IMM010
Early diagnosis of the genotoxic and mutagenic effects of work substances taking into account in particular the intensity and duration of the effect of asbestos, artificial mineral fibres, isocyanates and epoxides
: Project-Nr. BGFAPATH005A
The damaging effect on the lungs of cooling lubricant aerosols
: Project-Nr. BGFAPATH004A
Toxicity of glycol ethers
: Project-Nr. BGFATOX006
Systematic recording of respiratory tract diseases caused by sensitising workmaterials
: Project-Nr. BGFAZEN003
Pulmonary fibrosis in the rubber industry
: Project-Nr. BGFAZEN004
Systematic recording and assessment of occupational airway sensitizers
: Project-Nr. BGFAZEN005
Epidemiological intervention study: injury reduction
: Project-Nr. BGIA0072
Non-contact protective device for finger detection on circular saws
: Project-Nr. BGIA0073
Three-dimensional measurement facility for the surveying of overhead lines
: Project-Nr. BGIA0079
Implementation of BG research projects in practice
: Project-Nr. BGIA0082
Topic Centre Work Environment (TCWE)
: Project-Nr. BGIA0084
Quality assessment of programmable logic controllers (PLCs) programs
: Project-Nr. BGIA0085
Topic Center Risk Observatory: creation of a risk observatory at the European Agency for Safety and Health at Work
: Project-Nr. BGIA0086
Warning facility for bone bandsaws
: Project-Nr. BGIA0088
OHS targets and areas of activity for the Common German OHS strategy (GDA)
: Project-Nr. BGIA0089
Topic Centre Occupational Safety and Health 2009
: Project-Nr. BGIA0090
Epidemiological evidence quartz, silicosis and lung cancer (II): Chinese cohort study, re-analysis
: Project-Nr. BGIA1074
Up-to-date epidemiological results for carpal tunnel syndrome in connection with occupation
: Project-Nr. BGIA1075
Limit value for wood dust
: Project-Nr. BGIA1078
German version of International Chemical Safety Cards (ILO/WHO)
: Project-Nr. BGIA1079
Quartz exposure at the workplace
: Project-Nr. BGIA1082
Meta-analysis of the efficacy and cost-effectiveness of measures for the prevention of needlestick injuries to health care workers
: Project-Nr. BGIA1083
Sensitizing potency of epoxy resin components in the local lymph node assay (LLNA)
: Project-Nr. BGIA1084
Climatic measurements in the BGMG hazardous substances measurement system: systematic recording of data and reporting
: Project-Nr. BGIA1085
The use of air purifiers operating on the electric discharge principle
: Project-Nr. BGIA1086
Documentation and searches in BGMG-DOK
: Project-Nr. BGIA1089
Feasibility study: Epidemiological case control study for risk assessment of frequency dependent occupational hand arm vibrations
: Project-Nr. BGIA1092
Limit value for wood dust (II): exposure, epidemiology, and definition of the limit value
: Project-Nr. BGIA1094
Simple model for measurement and evaluation of the exposure to substance mixtures at the workplace
: Project-Nr. BGIA1095
Evaluation of the TNO "Stoffenmanager" with MEGA exposure data
: Project-Nr. BGIA1096
Design of mobile computer-aided workplaces
: Project-Nr. BGIA1097
Quality in prevention, Sub-project 8, "Investigation"
: Project-Nr. BGIA1098
Database of mental stresses
: Project-Nr. BGIA1099
Data collection and data transferring inside the MGU with ultrafine particles
: Project-Nr. BGIA1100
Impact on occupational safety and health in Europe of the increasing use of portable computing and communication equipment
: Project-Nr. BGIA1102
Sensitivity of older persons to hazardous substances
: Project-Nr. BGIA1103
"Benzene years" medical history software
: Project-Nr. BGIA1104
Prefilter for coarsely dispersed dust particles
: Project-Nr. BGIA2047
Analysis of humidified water and other material samples by two different methods for endotoxin measurement
: Project-Nr. BGIA2053
Comparison of two different laboratory systems for the identification of bacteria isolates
: Project-Nr. BGIA2055
Determination of the soluble portion of dust
: Project-Nr. BGIA2058
Development of a new bioaerosol sampler employing the impingement process
: Project-Nr. BGIA2059
Analyses of thermally treated asbestos cement
: Project-Nr. BGIA2060
Revision of the "fibre years" report (cumulative asbestos fibre dose)
: Project-Nr. BGIA2061
Study of powder stains used in the 1950s until the 1970s with regard to their content of azo dyes
: Project-Nr. BGIA2063
Hygienic aspects of wearing disposable gloves when selling food at refrigerated counters
: Project-Nr. BGIA2064
Production of test gases for low-volatility substances on a dynamic test gas stream facility
: Project-Nr. BGIA2065
The use of Carbotrap thermal desorption tubes for measurement of volatile and very volatile organic compounds
: Project-Nr. BGIA2066
Reconstruction of workplace exposure during the welding of rail joints
: Project-Nr. BGIA2067
Identification of method metrics for VOC measurements by means of the test gas stream
: Project-Nr. BGIA2068
Identification of legionella by means of fluorescence microscopy
: Project-Nr. BGIA2069
Method for the measurement of lead in the vicinity of lead-glass furnaces
: Project-Nr. BGIA2072
Sensitizing effect of mould and mites during building redevelopment
: Project-Nr. BGIA2073
Environmental Tobacco Smoke (ETS): measurement of acrylonitrile and nicotine in working areas
: Project-Nr. BGIA2074
Measurement of isomeric nitrotoluenes by means of silica gel tubes and GC/ECD
: Project-Nr. BGIA2075
Hairdressing chemicals/protective gloves
: Project-Nr. BGIA3084
Evaluation of the PGP-EA aerosol sampler by means of welding fume measurements
: Project-Nr. BGIA3086
Hazard assessment and protective measures at workplaces involving manual filling and weighing-out processes
: Project-Nr. BGIA3091
Exhaust and filtration of metal working fluids emissions on machine tools
: Project-Nr. BGIA3093
Protective measures relating to the handling of styrene
: Project-Nr. BGIA3094
Test method for in-situ measurement of penetration by chemical substances of chemical gloves
: Project-Nr. BGIA3095
The use of vortex hoods in masonry work (dust collection)
: Project-Nr. BGIA3100
The use of mobile humidifiers in office areas
: Project-Nr. BGIA3101
Study of surgical face mask products according to criteria for respiratory protective devices
: Project-Nr. BGIA3102
Monitoring strategies for workplaces with handling of nanoparticles
: Project-Nr. BGIA3103
Emissions of hazardous substances from propellants employed in stud guns
: Project-Nr. BGIA3104
Risk assessment of tasks involving styrene
: Project-Nr. BGIA3105
Test facility for metal working fluid filters
: Project-Nr. BGIA3106
Zinc chromate exposure during spray painting with spray cans
: Project-Nr. BGIA3107
Duration of wear of protective gloves under field conditions: validation of the method
: Project-Nr. BGIA3110
Explosion hazards during the blasting of metals
: Project-Nr. BGIA3111
Container freight information portal
: Project-Nr. BGIA3113
Development of a simple air change rate measurement system
: Project-Nr. BGIA3115
Hand-arm vibrations and coupling forces: measurement methods
: Project-Nr. BGIA4098
CUELA introductory project
: Project-Nr. BGIA4103
Creation of a "spinal stress" database modelled on the OMEGA system
: Project-Nr. BGIA4104
Exposure assessment within the so-called German Spine Study - EPILIFT
: Project-Nr. BGIA4105
Musculo-skeletal stress suffered by linemen
: Project-Nr. BGIA4107
Vibration excitation on piste groomers
: Project-Nr. BGIA4109
Noise impact at workplaces on construction sites (V)
: Project-Nr. BGIA4110
Exposure of bus drivers to vibration
: Project-Nr. BGIA4113
Extension of the ergonomics laboratory for the measurement of internal musculo-skeletal stresses
: Project-Nr. BGIA4115
Vibration exposure at workplaces: an overview
: Project-Nr. BGIA4116
Opportunities for analysis presented by the OMEGA noise emissions data collected at the BGIA
: Project-Nr. BGIA4117
Suitability of sunscreen products for the prevention of skin cancer
: Project-Nr. BGIA4118
Sound attenuation of hearing protectors in workplaces II
: Project-Nr. BGIA4119
Electromagnetic fields on hand-held spot-welding guns
: Project-Nr. BGIA4120
A comparison between assessment methods for whole-body vibration: preliminary study
: Project-Nr. BGIA4121
Noise abatement materials in call centres
: Project-Nr. BGIA4122
CUELA service project
: Project-Nr. BGIA4123
Guidance document for the avoidance of musculoskeletal stress amongst interior designers
: Project-Nr. BGIA4124
Ergonomics at assembly workplaces
: Project-Nr. BGIA4125
Noise impact at workplaces on construction sites (VI)
: Project-Nr. BGIA4127
Musculo-skeletal disease of the upper extremities, and vocational activity
: Project-Nr. BGIA4128
Feasibility study into a European database of personal protective equipment
: Project-Nr. BGIA4129
Ergonomic study of special seat products for office and VDU workplaces
: Project-Nr. BGIA4130
Ergonomic requirements for computer input devices
: Project-Nr. BGIA4131
OMEGA Database "Musculo-skeletal strains - prevention"
: Project-Nr. BGIA4133
EU guide to protection against vibration
: Project-Nr. BGIA4134
Vibration impact of manually guided equipment in the woodworking industry
: Project-Nr. BGIA4135
Simultaneous measurement of whole-body vibration and posture
: Project-Nr. BGIA4136
Exposure data on ototoxic hazardous substances and noise
: Project-Nr. BGIA4137
Measured value register of knee stress work activities (GonKatast)
: Project-Nr. BGIA4138
Availability and efficacy of anti-vibration safety gloves - preliminary study
: Project-Nr. BGIA4139
Evaluation and interpretation of the "German Spine Study" (EPILIFT)
: Project-Nr. BGIA4140
The force atlas for assembly operations I
: Project-Nr. BGIA4141
Practical implementation of the results from the project concerning stress upon the lumbar spine during shovelling
: Project-Nr. BGIA4143
Loading on the knee joint during kneeling and squatting
: Project-Nr. BGIA4145
Efficacy of absorber elements in meat-processing
: Project-Nr. BGIA4146
Re-analysis of and amendments to the epidemiological study of whole-body vibration (BIA Project 4050)
: Project-Nr. BGIA4147
Feasibility study into use of the CUELA system for assessment of musculoskeletal stress in milking parlours
: Project-Nr. BGIA4148
Physical stress profiles at point-of-sale workplaces
: Project-Nr. BGIA4150
Evaluation of an ergonomically designed ironing workstation
: Project-Nr. BGIA4151
Guide to "ergonomics and office chairs" for use in the field
: Project-Nr. BGIA4175
Bypassing of protective devices on machinery
: Project-Nr. BGIA5089
Safety of power-operated revolving doors
: Project-Nr. BGIA5092
Straightforward analysis of the probability of failure of safety-related control systems
: Project-Nr. BGIA5093
Decelerometer for goods vehicle seat-belt sleds
: Project-Nr. BGIA5094
Guideline for assessment of "safety-related programmable control systems for universal usage in the event business" (SPCUE)
: Project-Nr. BGIA5095
SISTEMA program for the design of safe machine control systems
: Project-Nr. BGIA5097
"ZuverSicht" – efficient enhancement of the reliability of safety-critical mechatronic systems
: Project-Nr. BGIA5098
Vision-based protective devices
: Project-Nr. BGIA5100
Practical assistance on the revised standard for controls
: Project-Nr. BGIA5101
Safety-related parts of control systems
: Project-Nr. BGIA5102
Codes of practice for rescue procedures on aerial railways
: Project-Nr. BGIA5103
Research on risks of injury at assisting robots
: Project-Nr. BGIA5105
Collaborative Programme Occupation and Health
: Project-Nr. BGZ0001
Integrative Programme Occupation and Health
: Project-Nr. BGZ0002
Definition of high-risk groups of workers formerly exposed to asbestos
: Project-Nr. BIA0031
Shipping containers for sample carriers
: Project-Nr. BIA0038
Epidemiological study Saxonia
: Project-Nr. BIA0050
Development of a guide of good practice for the improvement of safety and health (risk evaluation) in small enterprises
: Project-Nr. BIA0051
BIA-Software "Noise" for recording and assessment of workplace exposure measurements
: Project-Nr. BIA0054
Key innovations for prevention services of the future in OH&S "Prävention 2000+"
: Project-Nr. BIA0055
Studies into tripping, slipping and falling accidents in the institution for statutory accident insurance and prevention in the meat-processing industry
: Project-Nr. BIA0056
Development of an internet system for occupational safety and health research information
: Project-Nr. BIA0058
Information on research into safety and health protection at work - data collection and internet development
: Project-Nr. BIA0059
Epidemiological metaanalysis cadmium
: Project-Nr. BIA0060
Epidemiological evidence quartz, silica and lung cancer
: Project-Nr. BIA0061
Epidemiological synopsis of benzene and leukemia
: Project-Nr. BIA0062
Epidemiological synopsis of diesel exhaust emissions and lung cancer
: Project-Nr. BIA0063
OMEGA "Hazardous Substances" software for the recording and assessment of workplace exposure measurements
: Project-Nr. BIA0064
CCall: successful and healthy working in call centres
: Project-Nr. BIA0066
Design of user guides for complex safety-related systems
: Project-Nr. BIA0067
Black toner
: Project-Nr. BIA0068
Study of the benefit provided by the testing and certification activity of the Institutions for Statutory Accident Insurance and Prevention (BGs) for the prevention work of the BGs
: Project-Nr. BIA0069
OH&S monitoring systems
: Project-Nr. BIA0070
Topic Centre on Research - Work and Health 2002
: Project-Nr. BIA0071
Dossier on tetrachloroethene (PCE)
: Project-Nr. BIA0074
Tetrachloroethene and cancer. Critical review and synthesis of the epidemiological literature
: Project-Nr. BIA0075
Quality metrics for safety-related software in machine guarding
: Project-Nr. BIA0077
Topic Centre Research - Work and Health: Design and implementation of an information system for emerging risks and monitorig systems in occupational safety and health
: Project-Nr. BIA0078
European research on occupational safety and health: emerging risks and monitoring of work conditions
: Project-Nr. BIA0080
Development and construction of a smoking cabin
: Project-Nr. BIA0081
Ageing of industrial helmets
: Project-Nr. BIA1011
Protective clothing and protective gloves against chemical risks
: Project-Nr. BIA1044
Comparison of test methods for industrial safety helmets
: Project-Nr. BIA1045
Test criteria for diffusive samplers
: Project-Nr. BIA1046
Setup of facilities for testing of gas measuring and sampling devices
: Project-Nr. BIA1047
Surface designs of natural stone floor coverings
: Project-Nr. BIA1051
Cleaning and servicing natural stone floor coverings
: Project-Nr. BIA1054
Study of the performance of detector tube measurement systems
: Project-Nr. BIA1055
Automation of fibre analysis by SEM/EDXA
: Project-Nr. BIA1056
Thoracic sampling of fibres
: Project-Nr. BIA1057
Size Selective Personal Air Sampling Using Porous Foams
: Project-Nr. BIA1058
Generation of the test field for radiofrequency (RF) protective clothing
: Project-Nr. BIA1059
Personal dust sampler system for a flow rate of 10 l/min
: Project-Nr. BIA1061
Expansion of the automatic fibre analysis by means of SEM/EDX to special fibres (inorganic material fibres)
: Project-Nr. BIA1062
Ammonia-caused cross-sensitivities when using short-term detector tubes for formaldehyde after disinfection of rooms
: Project-Nr. BIA1065
Respiratory protection against ozone
: Project-Nr. BIA1066
Protection through op-face masks and minimum requirements for respiratory protective equipment
: Project-Nr. BIA1067
Influence of the breathing mode on the service life of gas filters
: Project-Nr. BIA1068
Flammability and combustion characteristics of breathing filters
: Project-Nr. BIA1069
Chemical and microorganism-resistant footwear
: Project-Nr. BIA1070
Glare on visual display terminals
: Project-Nr. BIA1071
Substances contained in dichloromethane-free paint strippers
: Project-Nr. BIA1073
Migration, work and health
: Project-Nr. BIA1076
Work-related health risks: research and company practice
: Project-Nr. BIA1077
Materials-related emissions from agents employed in computer appliances
: Project-Nr. BIA1080
Determination of talc in alveolar dusts
: Project-Nr. BIA2016
Mineral acids in workplace air
: Project-Nr. BIA2021
Polychlorinated dibenzodioxins and dibenzofurans in workplace air in waste incineration and metal recycling plants
: Project-Nr. BIA2022
Chromium (VI) in leather
: Project-Nr. BIA2023
Explosives in workplace air
: Project-Nr. BIA2028
Semivolatile nitrosamines in workplace air
: Project-Nr. BIA2029
Gypsum from flue gas desulphurization plants
: Project-Nr. BIA2030
Nitrosamines in stripping baths
: Project-Nr. BIA2031
Simultaneous sampling of vapour and particles
: Project-Nr. BIA2032
New measurement procedure for esters
: Project-Nr. BIA2034
New measurement procedure for glycolether/-ester
: Project-Nr. BIA2035
Measurement procedure for determination of ammonia
: Project-Nr. BIA2036
Sample dissolution for the analytical determination of soluble metal compounds
: Project-Nr. BIA2037
Assessment of workplaces with exposure to rosin
: Project-Nr. BIA2038
Measurement procedure for methyl tertiary butyl ether
: Project-Nr. BIA2039
Measurement procedure for 2-butanone oxim
: Project-Nr. BIA2040
Measurement of the average benzo[a]pyrene content in the CTPV (coal tar pitch volatiles) component
: Project-Nr. BIA2041
Development of a procedure for measurement of Kathon CG
: Project-Nr. BIA2044
Retrospective determination of the cumulative asbestos fibre dust dose ("fibre years") of employees
: Project-Nr. BIA2045
Measurement of silicon carbide in respirable dusts
: Project-Nr. BIA2046
Method for measurement of thermal decomposition products of sand cores bonded with polyurethane in foundries
: Projekt-Nr. BIA2049
Method for measurement of glycolic acid n-butyl ester
: Project-Nr. BIA2050
Hygienic studies on seagoing vessels
: Project-Nr. BIA2052
Microbial contamination of laboratory eyewash stations
: Project-Nr. BIA2054
Procedure for measurement of inhaltion anesthetics
: Project-Nr. BIA2056
Identification of asbestos fibres in mineral dusts
: Project-Nr. BIA2057
Dust situation and protective measures in stonemasons' businesses
: Project-Nr. BIA3026
Installation of an apparatus for determination of the minimum ignition energy of dusts
: Project-Nr. BIA3027
Testing of apparatus for determination of the minimum ignition energy of dusts
: Project-Nr. BIA3028
Documentation of dust explosions
: Project-Nr. BIA3036
Driver's workplace in the standard transport bus
: Project-Nr. BIA3037
Driver's workplace in tram vehicles; joint project launched by the institution for statutory accident insurance and prevention in the railway, metropolitan railway and tramway sector
: Project-Nr. BIA3038
Risk assessment and protective measures required for the prevention of dust explosions arising through the silaging and subsequent processing of crystallized sugar
: Project-Nr. BIA3040
Charges of the respiratory tract due to hazardous substances at haidressers' workplaces
: Project-Nr. BIA3041
Studies into size-fractionated sampling of dusts by means of polyurethane
: Project-Nr. BIA3042
Conversion factors for hazardous substances - calculation of conversion factors for gases, vapours, mists
: Project-Nr. BIA3047
Dust emissions of hand-held electrical tools for wood working
: Project-Nr. BIA3049
Combustion and explosion characteristics of dusts
: Project-Nr. BIA3051
Test bench for testing machinery for the removal of Class H particulate
: Project-Nr. BIA3052
Occupational safety and environmental protection in industrial laser ablation techniques - LASER 2000
: Project-Nr. BIA3055
Emissions of hazardous substances from machines
: Project-Nr. BIA3056
Conceptual design and commissioning of a cabin for simulation of working operations
: Project-Nr. BIA3057
Dust emission during release of vacuum from cathode-ray tubes
: Project-Nr. BIA3058
Testing of two direct-reading carbon monoxide meters in accordance with prEN 45544
: Project-Nr. BIA3059
Soldering fume emission
: Project-Nr. BIA3060
Dust emissions of wall chasers
: Project-Nr. BIA3061
BG/BIA recommendations: "Bitumen"
: Project-Nr. BIA3062
BG/BIA recommendations "Anaesthesia workplaces"
: Project-Nr. BIA3063
Determination of the capture efficiency of welding fume extraction devices
: Project-Nr. BIA3064
BG/BIA recommendations: "Maintenance work on passenger vehicles in workshops"
: Project-Nr. BIA3065
Tracer gas systems for the measurement of ventilation characteristics
: Project-Nr. BIA3066
Cleaning work involving petroleum containing benzene
: Project-Nr. BIA3067
Verified procedures for the disconnection and the drilling and tapping of asbestos cement water pipes
: Project-Nr. BIA3070
Verified procedures for the removal of flooring materials containing asbestos
: Project-Nr. BIA3071
Glove bag procedure for weight reduction of electric storage heaters containing asbestos
: Project-Nr. BIA3072
Verified procedure for the removal of friction linings (brake and clutch linings) containing asbestos
: Project-Nr. BIA3073
BG/BIA recommendations: Exhaust emissions tests at test centres
: Project-Nr. BIA3074
BG/BIA recommendations "Intaglio printing"
: Project-Nr. BIA3075
BG/BIA recommendations "Flour dust in bakeries"
: Project-Nr. BIA3076
BG/BIA recommendations for inspections in motor vehicle test centres
: Project-Nr. BIA3077
Manual filling and weighing processes
: Project-Nr. BIA3079
Air quality at office workplaces
: Project-Nr. BIA3080
Dust-raising behaviour and material composition of diatomaceous earths
: Project-Nr. BIA3081
BG/BIA Recommendations: Use of cooling lubricants in metal machining
: Project-Nr. BIA3092
Vibration exposure in buildings
: Project-Nr. BIA4019
Hearing protectors for drivers of vehicles
: Project-Nr. BIA4024
Risk of hearing loss caused by impulse noise
: Project-Nr. BIA4035
Noise-reduced technologies and working processes - metal working
: Project-Nr. BIA4039
Measuring method for sound reduction by distance doubling
: Project-Nr. BIA4040
Vibration exposure at workplaces of stone masons
: Project-Nr. BIA4041
Noise exposure experienced by construction site workers
: Project-Nr. BIA4044
Vibration exposure of fork lift truck drivers
: Project-Nr. BIA4048
Epidemiological study "Whole-body vibration"
: Project-Nr. BIA4050
Personal protective equipment against vibration: anti-vibration gloves
: Project-Nr. BIA4051
Vibration exposure of truck drivers
: Project-Nr. BIA4054
Vibration reduction on bunk-beds
: Project-Nr. BIA4055
PC information system for the selection of personal protective equipment
: Project-Nr. BIA4056
Hearing protector performance in impulse noise
: Project-Nr. BIA4057
Noise impact upon helicopter pilots and helicopter ground crews
: Project-Nr. BIA4058
Evaluation of the acoustic quality of workrooms by means of a calculation model
: Project-Nr. BIA4060
Impact of vibration upon bus drivers' workplaces
: Project-Nr. BIA4065
Stress placed upon the spinal column during the lifting and carrying of loads - development of a worker-specific measurement system
: Project-Nr. BIA4066
Acoustical test method for level-dependent earmuffs
: Project-Nr. BIA4067
Analysis of the state of noise abatement technology in connection with compacting machines for the production of precast concrete slabs
: Project-Nr. BIA4068
Procedure for testing the vibration emissions of mobile machinery on natural test tracks
: Project-Nr. BIA4069
Analysis of the state of engineering in the field of low noise nozzles
: Project-Nr. BIA4070
Noise impact at workplaces on construction sites (IV)
: Project-Nr. BIA4071
Exposure to hand-arm vibration at workplaces in the construction industry
: Project-Nr. BIA4072
Audibility of warning signals while wearing level dependent ear-muffs
: Project-Nr. BIA4073
Sound power level and emission sound pressure level of machines
: Project-Nr. BIA4074
Noise reduction of weaving looms
: Project-Nr. BIA4075
Accidents due to slipping, tripping and falling in the butcher's trade - Partial project: development of a measuring method for work process analysis
: Project-Nr. BIA4076
Vibration exposure of helicopter pilots
: Project-Nr. BIA4079
Vibration exposure in coaches at the driver's seat and in the sleeping compartment
: Project-Nr. BIA4080
Vibration exposure during riding
: Project-Nr. BIA4081
Hand-arm motion recording and analysing system - laboratory and field validation
: Project-Nr. BIA4082
Acoustic test procedure for ear-muffs with audio communication
: Project-Nr. BIA4083
Detection and assessment of movements of the upper limbs
: Project-Nr. BIA4084
Ergonomics at sewing workplaces
: Project-Nr. BIA4085
Ergonomic assessment of a memory seat for a bus driver's workplace
: Project-Nr. BIA4086
Hearing protectors for use in indoor shooting ranges
: Project-Nr. BIA4087
Durability of vibration-reducing drivers´ seats in earth moving machinery
: Project-Nr. BIA4088
Vibration reduction seats for trolley buses and low floor buses
: Project-Nr. BIA4089
Whole-body vibration of railway locomotive drivers
: Project-Nr. BIA4090
Round robin test involving dynamic dummies for the testing of drivers' seats
: Project-Nr. BIA4091
Operating safety of personal protective equipment (PPE) including electronic circuits
: Project-Nr. BIA4092
European Information System for Occupational Safety and Health (EISOSH)
: Project-Nr. BIA4093
Recording of the musculo skeletal load experienced by stewardesses when pushing trolleys on board aircraft
: Project-Nr. BIA4094
Recording and analysis of the musculo-skeletal load upon employees in container ports
: Project-Nr. BIA4095
Test method for supplementary handles with vibration damping
: Project-Nr. BIA4096
Whole-body vibration at workplaces: hazard assessment in accordance with the EU proposal for a Vibration directive
: Project-Nr. BIA4097
Loading upon cabin attendants induced by the pushing and pulling of trolleys on board airlines
: Project-Nr. BIA4099
Spinal loading in the nursing professions
: Project-Nr. BIA4100
Noise reduction on circular saws by means of low-noise saw blades
: Project-Nr. BIA4101
Selection criteria for call centre headsets
: Projekt-Nr. BIA4102
Influence of frequency weighting to VDI 2057-1:2002 upon the whole-body vibration exposure
: Project-Nr. BIA4108
Harmful substances in hearing protectors
: Project-Nr. BIA4111
Program interface for transfer of posture data from the CUELA system to the "Dortmunder" biomechanical model
: Project-Nr. BIA4114
Dynamic pressure testing of hydraulic flexible hoses
: Project-Nr. BIA5001
Dissipation ability for electrostatic charges of floor coverings used in gas pressure control plants and compression stations
: Project-Nr. BIA5015
The behaviour of shrouded plug and socket connectors to DIN 49462/63 under environmental influences in the construction sector
: Project-Nr. BIA5019
Dynamic pressure testing of hydraulic flexible hose assemblies - Ageing effects of storage conditions
: Project-Nr. BIA5031
Light barriers with test facility
: Project-Nr. BIA5032
Plastic hydraulic hose assemblies
: Project-Nr. BIA5037
Investigations into the ageing of hydraulic flexible hose assemblies used in mobile longwall supports in the coal mining industry
: Project-Nr. BIA5040
Pressure-sensitive mats and floors
: Project-Nr. BIA5044
Obstacle detection on driverless industrial trucks
: Project-Nr. BIA5052
Failure lists for hydraulic and pneumatic components
: Project-Nr. BIA5055
Realisation of category 3 according to EN 954-1 by use of programmable logic controllers (PLC) - examples
: Project-Nr. BIA5060
Safe application of converter-powered drives
: Project-Nr. BIA5061
Homogeneous-redundant programmable controllers in failsafe technique
: Project-Nr. BIA5063
Optical scanning devices for collision protection on automated guided vehicles
: Project-Nr. BIA5065
Reduction in the hazard levels presented by automated production lines under fault conditions
: Project-Nr. BIA5066
New types of programmable electronic controls for safety circuits in paper cutting guillotines
: Project-Nr. BIA5068
Validation of the protective zone of electro-sensitive protective equipment (ESPE)
: Project-Nr. BIA5073
Recommendations for the testing and certification of hydraulic proportional directional control valves
: Project-Nr. BIA5074
Programming language subsets
: Project-Nr. BIA5075
Quantitative analysis of complex electronic systems using fault tree analyses and Markov models
: Project-Nr. BIA5076
Door controls with integrated safety function
: Project-Nr. BIA5077
Integrated safety technology for machinery
: Project-Nr. BIA5079
Complex safety functions on machinery
: Project-Nr. BIA5080
Transmission of safety-related signals via standard field bus systems
: Project-Nr. BIA5081
Assessment of the safety-related reliability of control systems: development of practical test methods
: Project-Nr. BIA5084
Development of a checklist for testing and certification of ergonomic machinery design
: Project-Nr. BIA5088
Analysis software for automatic signal processing of time-variable physical quantities in the project "Loading upon cabin attendants induced by the pushing and pulling of trolleys"
: Project-Nr. BIA5090
System for separate measurement of three-dimensional time-variant hand forces
: Project-Nr. BIA5091
Distribution of forces in full body harnesses
: Project-Nr. BIA6010
Loading tests on aged safety nets
: Project-Nr. BIA6011
Mechanical strength of grinding wheels
: Project-Nr. BIA6028
Mechanical strength and ageing of plastic steps
: Project-Nr. BIA6034
Self-locking and self-retardation of screw drives for vehicle lifts
: Project-Nr. BIA6035
Ageing of safety net materials
: Project-Nr. BIA6039
Cladding in scaffolds with couplers and their influenceon the anchorage points
: Project-Nr. BIA6043
Gripping safety of eccentric clamps
: Project-Nr. BIA6044
Test procedure to evaluate impact and holding forces at the shaft of manual operated concrete floating machines
: Project-Nr. BIA6047
Operating forces of power operated doors
: Project-Nr. BIA6048
Impact resistance of guards for turning machines
: Project-Nr. BIA6052
Impact strength of guard materials for machine centres
: Project-Nr. BIA6054
Ageing of resinoid bonded grinding wheels
: Project-Nr. BIA6055
Service life of self-locking and self-retarding spindle drives for vehicle lifts
: Project-Nr. BIA6056
Impact strength of polycarbonate vision panels in guards
: Project-Nr. BIA6057
Metal foams for guards on high-speed machine tools
: Project-Nr. BIA6058
Safety of power-operated brushing tools
: Project-Nr. BIA6059
Impact resistance of guards on stationary grinding machines
: Project-Nr. BIA6061
Reaction times under the effect of crushing forces
: Project-Nr. BIA6067
Side impact behavior of industrial safety helmets
: Projekt-Nr. BIA6068
Test method for knee pads
: Project-Nr. BIA6069
Service life of industrial safety helmets manufactured from fibre-reinforced phenol formaldehyde resin
: Project-Nr. BIA6070
Reduction of microbial air pollution in waste sorting plants
: Project-Nr. BIA7001
Criteria documents for foreign occupational exposure limits
: Project-Nr. BIA7002
Sample preparation for bacterial toxicity tests by means of thermodesorption
: Project-Nr. BIA7003
Occupational handling of antineoplastic drugs and cancer risk
: Project-Nr. BIA7004
Health hazard assessment of colour print toner dust
: Project-Nr. BIA7005
Microbiological investigations in textile plants
: Project-Nr. BIA7006
Round-robin assay of mould detection on filters contaminated artificially in a dust tunnel
: Project-Nr. BIA7007
Investigation of microbiological agents in vehicle washing facilities
: Project-Nr. BIA7009
Bacteria and mould fungus species in cooling lubricants
: Project-Nr. BIA7010
Validation of the luminescent bacteria test
: Project-Nr. BIA7011
Toxicity of toner dusts
: Project-Nr. BIA7012
Impact of occupational noise induced hearing loss on central auditory processing
: Project-Nr. FF-FB0078
Validation of the new whole-body vibration evaluation methods, Part B: a reanalysis of the data of the wbv-study
: Project-Nr. FF-FB0082.2
Validation of the new whole-body vibration evaluation methods, Part B: a reanalysis of the data of the wbv-study
: Project-Nr. FF-FB0082B
Examination of degenerational and regenerational characteristics in lumbar discs and check of the relationship with occupational lumbar load
: Project-Nr. FF-FB0082
Comparative studies for the determination of the diffusion capacity of the lung using CO and NO
: Project-Nr. FF-FB0086
Analytical study on testicular tumors occurring in automobile industry employees - embedded case-control-study
: Project-Nr. FF-FB0087
Early detection study for urinary bladder cancer in a risk collective - Subproject 2
: Project-Nr. FF-FB0093
Evaluation of inpatient rehabilitation regarding pulmonary diseases in the clinics Falkenstein and Bad Reichenhall (Clinics of institutions for social accident insurance)
: Project-Nr. FF-FB0094
Medical-occupational rehabilitation of work-related dermatoses - optimizing and quality-management of an integrated interdisciplinary medical and educational programme of tertiary prevention
: Project-Nr. FF-FB0096
Determinatin of compression forces on the intervertebral disc L5/S1 for shovelling work tasks
: Project-Nr. FF-FB0100
Validation of the new whole-body vibration evaluation methods on the basis of the data of the previous epidemiological study "whole-body vibration" (wbv), Project part A
: Project-Nr. FF-FB0110A
Validation of the new whole-body vibration evaluation methods on the basis of the data of the previous epidemiological study "whole-body vibration" (wbv), Project part B
: Project-Nr. FF-FB0110B
Validation of new biomarkers for early diagnosis of mesothelioma in a longitudinal study - sub-project vital status research -
: Project-Nr. FF-FB0111
Quantification of ETS-exposure in non-smoking employees - a literature review
: Project-Nr. FF-FB0121
The relevance of the respiratory quotient (RQ) and lactate for the determination of the impaired earning capacity status
: Project-Nr. FF-FB0128
Quality management and evaluation of the optimized dermatologist's procedure and of the corresponding administrative multi-step-intervention procedure for occupational skin diseases
: Project-Nr. FF-FB0130
Scientific evaluation of the administrative management of reported cases of occupational skin diseases after the nationwide implementation of the "step wise procedure" (Stufenverfahren Haut) by the German Social Accident Insurance Institutions
: Project-Nr. FF-FB0130_2
Validity of static lungs compliance in asbestos-induced diseases of lung
: Project-Nr. FF-FB0131
Quantitative investigations of regeneration patterns in lumbar human discs; correlation of regeneration and occupational load
: Project-Nr. FF-FB0133
MRT-based pilot study to quantify the deformation of the cartilage of the knee joint with healthy persons after kneeling and perching work
: Project-Nr. FF-FB0138
Computer-assisted diagnosis of early-stage pleural mesothelioma using 3D data - system development and validation
: Project-Nr. FF-FB0148
Feasibility concerning the assessment of occupational claims with respect to the occupational disease No.2108 using data of the German lumbar spine study (EPILIFT)
: Project-Nr. FF-FB0154
Enhanced analysis of the German Spine Study (EPILIFT) aiming at deriving appropriate threshold values, part A: study centre Berlin
: Project-Nr. FF-FB0155A
Enhanced analysis of the German Spine Study (EPILIFT) aiming at deriving appropriate threshold values, part B: study centre Dortmund
: Project-Nr. FF-FB0155B
Enhanced analysis of the German Spine Study (EPILIFT) aiming at deriving appropriate threshold values, part C: study centre Halle/Saale
: Project-Nr. FF-FB0155C
Enhanced analysis of the German Spine Study (EPILIFT) aiming at deriving appropriate threshold values, part D: study centre Essen
: Project-Nr. FF-FB0155D
Malignant skin tumors induced by UV-irradiation - Development and evaluation of differentiation criteria between occupational and non-occupational causes relevant for the occupational health insurance
: Project-Nr. FF-FB0170
Long term evaluation of the cohorts in the research project "Rehabilitation of occupational skin diseases - Optimisation and quality assurance of inpatient management" (ROQ)
: Project-Nr. FF-FB0174
Part 2 of research project 'Malignant skin tumors induced by UV radiation': Case-Control-Study evaluating the association of occupational exposition to UV radiation and A) squamous-cell carcinoma and B) basal-cell carcinoma
: Project-Nr. FF-FB0181
Stresses and strains in hip joint cartilage during occupational activities
: Project-Nr. FF-FB0192
Psychosocial risk factors for intervetebral disc induced disease of lumbar spine
: Project-Nr. FF-FB0200
Longtime study about effectivity of safety engineers
: Project-Nr. FF-FP0205
Study for the Effectiveness of Skin Protecting Preparations within a Three Step Skin Protecting Plan - Risk assessment and safety measures
: Project-Nr. FF-FP0220
Prevention of calcaneus fracture - analysis of factors and development of measures
: Project-Nr. FF-FP0221
Rescue by rope
: Project-Nr. FF-FP0223
Health effects on workers in Oxygen-reduced atmosphere for fire prevention
: Project-Nr. FF-FP0224
Composite project: Measuring irritative and inconvenience causing effects - Part IfADo
: Project-Nr. FF-FP0228A
Composite project: Measuring irritative and inconvenience causing effects - Part IGF
: Project-Nr. FF-FP0228B
Quality of prevention - Effectiveness and efficiency of prevention services offered by the German institutions for accident insurance and prevention - Part 5 Accounting for prevention management
: Project-Nr. FF-FP02305
Quality of prevention - Effectiveness and efficiency of prevention services offered by the German institutions for accident insurance and prevention - subproject 9: Occupational medical attendance
: Project-Nr. FF-FP02309
Investigations into the health effects and genotoxicity of bitumen fumes on the respiratory tract of occupational exposed individuals
: Project-Nr. FF-FP0233
Development and evaluation of technical solution to avoid collision accidents between persons and forklift trucks
: Project-Nr. FF-FP0235
Implementation of a standardized human in-vivo protocol for efficacy testing of skin protective products against lipophilic occupational irritants
: Project-Nr. FF-FP0243
Deposition of cooling lubricant emissions at machine tools; sub-project IKE: optimisation of the collecting of materials at machine tools by flow simulation
: Project-Nr. FF-FP0244A
Separation of cooling lubricant emissions at machine tools, Projekt part WZL: investigations of state of the art of separation of cooling lubricant emissions and tests of new separation concepts for machine tools
: Project-Nr. FF-FP0244B
PAH exposure of bitumen exposed persons
: Project-Nr. FF-FP0246
Development and evaluation of a method for determining the permeation of the ingredients of epoxy resins through chemical protective gloves
: Project-Nr. FF-FP0248
Investigation of the risks of monomer emissions during the application of reactive PUR-hotmelts in consideration of the ordinance on hazardous substances and the TRGS 430
: Project-Nr. FF-FP0254
Transferability of the results of testing the slip resistance of safety, protective and occupational footwear according to DIN EN 13287 on critical practice conditions
: Project-Nr. FF-FP0259
Force Atlas for Assembly Operations Part II
: Project-Nr. FF-FP0262
Influence of occupational and environmental metal exposure on DNA-damage and DNA-repair capacity: Comparison of established and new biomarkers as to their predictivity for cancer development
: Project-Nr. FF-FP0266A
Influence of occupational and environmental metal exposure on DNA-damage and DNA-repair capacity: Comparison of established and new biomarkers as to their predictivity for cancer development
: Project-Nr. FF-FP0266B
Confine and differentiation of irritating and annoying effects of hazardous substances
: Project-Nr. FF-FP0267
Development of a dynamic stability test for counterbalanced trucks up to 10 t load capacity
: Project-Nr. FF-FP0268
Development and evaluation of an automated, practice-oriented measuring procedure for the determination of the permeation of compositions and products (preparations) by personal protection equipment
: Project-Nr. FF-FP0269
Biomonitoring of PAH exposure at workplaces: Determination of multiple hydroxylated urinary PAH metabolites of workers in the bitumen industry
: Project-Nr. FF-FP0270
Pooled analysis of European case-control studies on the interaction of occupational carcinogens in the development of lung cancer (Synergy)
: Project-Nr. FF-FP0271
Substitution as a measure to prevent occupational skin diseases; occupational contact allergy network (OCA-network)
: Project-Nr. FF-FP0272
Development of in-vivo test models for skin protective products as a tool to determine and rate their efficacy
: Project-Nr. FF-FP0275
Development of in-vivo test models for skin cleansing products
: Project-Nr. FF-FP0276
Development of a stripping method for surfaces covered by coatings and paints containing asbestos and PAHs
: Project-Nr. FF-FP0277
Safety engineering with radio frequency identification - modules 2 & 3
: Project-Nr. FF-FP0278
Development of an interactive virtual environment to evaluate usability tests in work safety applications - Investigation of the usability of protective devices of work equipment in commercial sectors
: Project-Nr. FF-FP0279
Microbiological investigation of cooling lubricants by cultivation dependent and cultivation independent methods
: Project-Nr. FF-FP0280
Evaluation and validation of a new designed test apparatus to test safety shoes preventing calcaneal fractures
: Project-Nr. FF-FP0282
Development of a method for exposure assessment of service tasks including customer contact and work-related psychosocial stress to derive improvement measures
: Project-Nr. FF-FP0283
Optimal Illumination for Shift Working - Literature Research
: Project-Nr. FF-FP0285
Network for protection of health for non-professional care relatives "Neuheit für Pflege"
: Project-Nr. FF-FP0286
Follow-up study for the analysis of needlestick injuries (NSI) among students of human medicine in consideration of the regulations of the TRBA 250
: Project-Nr. FF-FP0287
Adaptive, contactless near-infrared-sensor-systems for protective devices at saws
: Project-Nr. FF-FP0289
Studies about the dust explosion risks of mixers with moving tools for the definition and classification of possible explosion protection concepts
: Project-Nr. FF-FP0290
Evaluation of the preventive tool G46 of the German Social Accident Insurance with regard to effectivity and practicability – first step: cross-sectional analysis
: Project-Nr. FF-FP0293
Investigation on health effects of emissions from laserprinters and -copiers, Subproject LMU: Exposition of volunteers in a climatic chamber
: Project-Nr. FF-FP0294A
Investigation on health effects of emissions from laserprinters and -copiers, Subproject BAM: Characterization of the emissions in a climatic chamber
: Project-Nr. FF-FP0294B
Epidemiological Case-Controlstudy to assess the risks of frequency-dependent occupational hand-arm-vibrations
: Project-Nr. FF-FP0297
Investigation of measurement errors in sampling of aerosols of hazardous workplace materials
: Project-Nr. FF-FP0299
Capturing of life cycle data for Personal Protective Equipment with auto-id systems
: Project-Nr. FF-FP0301
Incendivity of Ultrasound Used in Potentially Explosive Atmospheres of Gases and Vapours
: Project-Nr. FF-FP0303
Investigations on the impact resistance of guards on stationary grinding machines against ejected fragments of abrasive products
: Project-Nr. FF-FP0304
Biological monitoring and evaluation of potential hazards arising from the use of permethrin treated protective clothing for employees in the forestry sector
: Project-Nr. FF-FP0305
Occupational health project "Combination of whole body vibration and posture"
: Project-Nr. FF-FP0306
Development of a bicycle simulator for traffic education and traffic safety trainings for different age groups
: Project-Nr. FF-FP0307
Fire and explosion hazards during handling and use of nano dusts
: Project-Nr. FF-FP0308
Global prevention balance sheet: Determination of the international return on prevention
: Project-Nr. FF-FP0310
Work-related psychosocial factors and health in subgroups: Individual-participant-data meta-analysis
: Project-Nr. FF-FP0311
In the teaching profession, healthy and motivated until retirement - prevention and human resource development methods
: Project-Nr. FF-FP0314
Analysis and design of working processes including customer contact in different service sectors and federal countries of Germany
: Project-Nr. FF-FP0315
Structural quality and nurse health in children's day care facilities
: Project-Nr. FF-FP0318
Norm compliant development and documentation of safety related application software in manufacturing system engineering
: Project-Nr. FF-FP0319
Simplified Operating Instructions
: Project-Nr. FF-FP0320
Pilot study to assess the influence of shift work on health - Analysis of the influence of shift work to metabolomic concentration- and hormone profiles on nurses
: Project-Nr. FF-FP0321
Hazard by irradiation of laser pointers – hazard studies for pilots and drivers of public transportation during work assignment
: Project-Nr. FF-FP0322
Ranking of substances included in epoxy resin systems according to their sensitizing potency
: Project-Nr. FF-FP0324
Ergo-Kita - Prevention of musculo-skeletal disorders among nursery school teachers in day-care centers
: Project-Nr. FF-FP0325
Sensory irritation - time extrapolation, intra- and inter-individual differences
: Project-Nr. FF-FP0326
Conspicuity of high visibility clothing
: Project-Nr. FF-FP0328
Regional accident black spots in the area of schools und businesses - analysis, cause-study and prevention-approaches
: Project-Nr. FF-FP0330
Design and development of a prototype of a central active laser guard for industrial remote high-power laser systems
: Project-Nr. FF-FP0331
Cohort study to investigate cancer incidence among shift workers at BASF
: Project-Nr. FF-FP0332
Examination of the first support system in public transportation sector
: Project-Nr. FF-FP0335
FRAMES - Early Warning System to adaptively recognize people-vehicle collision dangers for safety improvements
: Project-Nr. FF-FP0336
Development of methods in protein analysis for the identification of candidate markers to facilitate the (early) diagnosis of asbestos-associated tumors of the lung and the pleura
: Project-Nr. FF-FP0339
Development of a calibration procedure for floor coverings in wet loaded barefoot areas
: Project-Nr. FF-FP0341
Evidence of quality-result in BG-therapy - Standardised computer-supported evaluation of medical expertises for purposes of quality assurance and improvement
: Project-Nr. FF-FR0081
Evaluation and development of psychotherapeutic interventions after severe burn injuries for patients during hospitalisation and rehabilitation Part 2
: Project-Nr. FF-FR0083A
Development and application of scoring systems supporting a successful rehabilitation and social reintegration of paraplegic patients
: Project-Nr. FF-FR0085
Evaluated prognosis based on somatic, psychological and social factors related to the treatments approved by the statutory accident insurance
: Project-Nr. FF-FR0095
Development of internal fixator systems as intelligent implants
: Project-Nr. FF-FR0099
Diagnostics of dizziness and balance disorders after whiplash and craniocerebral injury and their specific therapy by local blockade of the proprioceptors of the neck muscles
: Project-Nr. FF-FR0106
Participation through mobility - influence of wheelchair mobility on participation for people with acquired paraplegia
: Project-Nr. FF-FR0114
Investigations to identify factors for a poor prognosis and to evaluate new therapeutic interventions regarding the complex regional pain syndrome (crps/M.Sudeck)
: Project-Nr. FF-FR0115
Validation of a screening instrument for identification of patients, who have a risk to develop a Post Traumatic Stress Disorder (PTSD), based on data of severely injured accident victims
: Project-Nr. FF-FR0116
Development of a Finite Elemente Tool to evaluate/validate the stability of osteosynthetic treatments
: Project-Nr. FF-FR0117
Development of "intelligent" external fixator systems
: Project-Nr. FF-FR0118
Activation characteristics of back- and trunk muscles after vertebral fractures and instabilities after lumbar spinal fusion
: Project-Nr. FF-FR0122
The influence of process and result quality on the cost-effectiveness of treating patients with flexor tendon injuries - Flexor Tendon Study
: Project-Nr. FF-FR0124
Correlation of neuropsychologic findings with changes in brain MR diffusion tensor imaging in patients with diffuse axonal injuries
: Project-Nr. FF-FR0125
Monitoring the quality in rehabilitation practice among patients with hand injuries: An ICF-based model of patient oriented rehabilitation
: Project-Nr. FF-FR0127
Evaluation of the effects of a rehabilitation program of pain management on discomforts, joint function, basic stamina, health-based quality of life and occupational rehabilitation of patients with near-ankle fractures and delayed recovery
: Project-Nr. FF-FR0132
Influence and predict structural changes in the shoulder joint of long-term paraplegic patients by using clinical evaluation and MRI examination
: Project-Nr. FF-FR0134
Outcome oriented evaluation of medical care provided within the statutory accident insurance
: Project-Nr. FF-FR0136
Methodological support and advice to the ongoing scientific evaluation of the German Worker's Compensation's managed care framework
: Project-Nr. FF-FR0136a
Retrospective study to survey the clinical and radiological results after arthroscopic revision surgery with renewed instability after open or arthroscopic shoulder stabilization
: Project-Nr. FF-FR0144
Modification of phantom limb pain using a functional myoelectric prosthesis with sensory feedback
: Project-Nr. FF-FR0145
Development of a chondron-based matrix-associated ACT
: Project-Nr. FF-FR0148
OrthoPilot® navigation of high tibial open wedge osteotomy with TomoFix™ plate and POSITION HTO plate
: Project-Nr. FF-FR0150
Cell loading of open-porous SLM-generated metal implants with mesenchymal stem cells for optimized tissue recovery and tissue regeneration
: Project-Nr. FF-FR0153
Therapeutic effects of serotonin antagonists on the development of systemic edema in the early phase of burn disease and overall survival in rats
: Project-Nr. FF-FR0159
Intravital study on the effect of extracorporeal shock waves on microcirculation and neoangiogenesis using an in vivo wound model in dorsal skinfold chamber
: Project-Nr. FF-FR0160
Implantable Microsystem for the Adaptation of the Spinal Cord after Paraplegia – Subproject A: Chip developmnet and clinical validation
: Project-Nr. FF-FR0162A
Implantable microsystem for spinal cord adaptation to treat paraplegia - Project Part B: Neurobiological validation
: Project-Nr. FF-FR0162B
Implantable microsystem for the adaptation of the spinal cord after paraplegia
: Project-Nr. FF-FR0162
FEST II Clinical validation of a simulation model which calculates the initial stability from osteosyntheses to quantify the healing process based on CT-Data
: Project-Nr. FF-FR0165
Biomechanical approach to "open-book" pelvic ring injuries with flexible implants in comparison to rigid fixation
: Project-Nr. FF-FR0167
Biomechanical in-vitro study to evaluate different osteosynthesis methods in comminuted intraarticular olecranon fractures
: Project-Nr. FF-FR0178
Clinical evaluation of long-term results for different methods of rehabilitation (compulsory health insurance (GKV) vs. employer's social accident coverage (BG)), in patients with calcaneal fractures, concerning function and quality of life.
: Project-Nr. FF-FR0180
Prospective study on breathing synchronized electrical stimulation of the abdominal muscles in patients with acute and chronic tetraplegia
: Project-Nr. FF-FR0182A
Prospective study on breathing synchronized electrical stimulation of the abdominal muscles in patients with acute and chronic tetraplegia
: Project-Nr. FF-FR0182B
Development of a rating scheme for the quality of processes and results in ambulant procedures of specialists for occupational accidents
: Project-Nr. FF-FR0183
Non-invasive electrical synchronization of the cerebric for the treatment of attention deficit disorders after traumatic brain injury
: Project-Nr. FF-FR0187
Prospective user-oriented design of medical products – methods to foster compliance of selfapplied medical aids
: Project-Nr. FF-FR0188
Implementation and use of the ICF Core Sets for Hand Conditions in clinical practice, rehabilitation and research: Lighthouse Project Hand
: Project-Nr. FF-FR0189
Mobility means Participation - Development und evaluation of a standardized mobility and physical activity – orientated follow-up program for people with paraplegia
: Project-Nr. FF-FR0193
Target-oriented recommendations for rehabilitation by correlative analyses of morphofunctional, intramuscular, electrophysiological and MR-based properties of back muscles in patients after spondylodesis and traumatic brain injury
: Project-Nr. FF-FR0194
Use of the Dynamic locking screw in the thoraco-lumbal spine plate in order to prevent a delayed bone healing on the spinal column
: Project-Nr. FF-FR0195
Modification of chronic phantom limb pain by using leg prostheses with sensory feedback
: Project-Nr. FF-FR0196
Development of a release system for antimicrobial substances based on an autologous plasma clot
: Project-Nr. FF-FR0199
Analysis of absent bone regeneration after occupational injuries in scaphoid non-unions
: Project-Nr. FF-FR0201
lmplantable Microsystem for the Adaptation of the Spinal Cord after Paraplegia - Subproject A: Chip development and clinical validation
: Project-Nr. FF-FR0203a
Evaluation of an employers guide for inclusion of people with complex communication needs in an ergonomically designed regular workplace
: Project-Nr. FF-FR0208
Technologies for the production of cutaneous microtissue particles for the treatment of large thermal injuries
: Project-Nr. FF-FR0211
Diffusing capacity
: Project-Nr. FFFB0086
Evaluation of inpatient rehabilitation regarding pulmonary diseases in the clinics Falkenstein and Bad Reichenhall (Clinics of employers' liability insurance association)
: Project-Nr. FFFB0094
Epidemiological study "Whole-body vibration"
: Project-Nr. FFFF0067
Optimising protective equipment against falls from a height - biomechanical load limits of man (main study)
: Project-Nr. FFFF0068
Occupational risk factors for the development of a carcinoma of the tessellated epithelium of the upper aero-digestive tract
: Project-Nr. FFFF0069
The development and checking of a quick-test to determine the mutagenic and carcinogenic effects of chemicals in the same cell system in order to avoid animal testing
: Project-Nr. FFFF0074
Investigating the danger of fires and explosions when spraying flammable liquids and when mixing these mechanically with water, taking into account in particular flammable solvents with flash points above 55 °C.
: Project-Nr. FFFF0076
Development of allergic and non-allergic dermatoses in entry-level hairdressers, nurses and metal workers on account of endogenous risk factors
: Project-Nr. FFFF0078
Determination of volatile and semi-volatile nitrosamines in the air
: Project-Nr. FFFF0084
Field study on the use of the ANES-system (occupational medical and neurotoxic evaluation system) in the context of medical preventive examinations of workers exposed to solvents
: Project-Nr. FFFF0085
Controlling the microbial pollution of water-mixable cooling lubricants
: Project-Nr. FFFF0087
Early diagnosis of asbestos-related carcinomas by means of x-ray computer tomography
: Project-Nr. FFFF0088
The testing of chemical additives and special extruders in order to reduce dust at the work place during spray concrete work
: Project-Nr. FFFF0089
Occupational safety in basic education
: Project-Nr. FFFF0090
Direct quantification of mono-, di- and triethanolamine in concentrates of cooling lubricants
: Project-Nr. FFFF0092
New ways of preventing work-related diseases
: Project-Nr. FFFF0093
Health problems of women in the world of work - gynaecologic problems in occupational medicine
: Project-Nr. FFFF0095
Exposure to trichloroethene at the workplace: possibilities of exposure control and risk assessment
: Project-Nr. FFFF0097
Effects of dust exposure on the environment of pressure-discharging parts of plants
: Project-Nr. FFFF0098
Research and development work on a pipe blocking system for the provisional blocking of gas pipes; further development of existing equipment concepts
: Project-Nr. FFFF0101
Co-operative project "Case-control-study into the relationship between exposure to respirable quartz dust and lung cancer", sub-project "Planning, data collection, evaluation"
: Project-Nr. FFFF0104
Investigation of the permanence of cellulose fibres in rats lungs
: Project-Nr. FFFF0105
Chemical protective gloves
: Project-Nr. FFFF0106
The development of guidelines for specific industries in order to encourage and promote the use of personal protective equipment (PPE) in accordance with the intended purpose
: Project-Nr. FFFF0108
Systematic investigations in order to quantify cooling lubricant constituents taking into account methodological and preventive, practice-related aspects of work protection
: Project-Nr. FFFF0109
The optimisation of industrial safety helmets taking into consideration improvements in fit and design
: Project-Nr. FFFF0110
Carrying out a field test with knee protectors for work performed in a kneeling position
: Project-Nr. FFFF0111
Inventory of occupational allergens
: Project-Nr. FFFF0114
Investigation of in-vivo and in-vitro persistence of mineral fibres and development of assessment criteria for the carcinogenic potential
: Project-Nr. FFFF0116
Level of knowledge concerning safety and health protection for employees when handling heavy loads
: Project-Nr. FFFF0119
Power and flexibility training for the back with trainees in order to prevent spinal damage and injuries - Model plan in the coal mining industry
: Project-Nr. FFFF0122
Reorganisation of training and further education for technical surveyors - training and further education concepts
: Project-Nr. FFFF0123
Harnessing systems for forklift truck drivers. Level 1: initial investigation. Level 2: development, construction and testing of prototypes
: Project-Nr. FFFF0124
Dependency of safety parameters on pressure below atmospheric pressure
: Project-Nr. FFFF0126
Determining spinal strain in selected occupations
: Project-Nr. FFFF0132
Toluene-study
: Project-Nr. FFFF0137
Quartzexposition, silicosis and lungcancer
: Project-Nr. FFFF0144
Ignitability of flock
: Project-Nr. FFFF0145
Testing genotoxicity with nasal mucosa
: Project-Nr. FFFF0146
Elaboration of generally valid respiratory characteristic curves for a process to determine the serviceable life of protective breathing filters at the work place with the help of a newly developed mobile testing device
: Project-Nr. FFFF0149
Comparative whole body vibration measurements (rated vibrational strength) with selected commercial vehicles from the former GDR and former COMECON countries for detailed testing by occupational illness specialists
: Project-Nr. FFFF0150
Validation and practical performance of a new field measuring device for Diesel-Motor-Emissions at workplaces
: Project-Nr. FFFF0153
Dortmund Lumbar Load Study
: Project-Nr. FFFF0159
Analysis of the potential for development in preventative services taking particular account of the target group; employees and the representation of their interests
: Project-Nr. FFFF0160
Market trends and development potential of preventative services in work and health protection taking particular account of the employers' point of view
: Project-Nr. FFFF0161
Examination of the composition and structure of oxidic components in dust released into the air at the work place during manufacture and processing of metallic materials containing nickel (dusts containing nickel)
: Project-Nr. FFFF0164
Guidelines for the incorporation of safety and health protection in company organisation and decision-making structures
: Project-Nr. FFFF0167
Neurotoxicity of solvent mixtures
: Project-Nr. FFFF0172
Explosion prevention for lacquer dryers
: Project-Nr. FFFF0180
Dermatological risks of vegetable oil esters
: Project-Nr. FFFF0187
Health risks from quartz dust in coalmining
: Project-Nr. FFFF0190
Developmend and validation of an Enzyme-Linked Immuno-Sorbent Assay (ELISA) for rapid and lowcost determination of polychlorinated Dibenzofuranes and Dibenzo-p-dioxines in air
: Project-Nr. FFFF0192
Development of a risk assessment for occupational dermal exposure to chemicals
: Project-Nr. FFFF0200
PAH-Biomonitoring
: Project-Nr. FFFF0201
Test Legionella
: Project-Nr. FFFF0202
Secondary prevention of asbestos-related mesothelia and lung cancers in special regards of morphology and kinetics of parenchymal and pleural findings
: Project-Nr. FFFF0204
EU-Project Guidelines for preventing falls from a height
: Project-Nr. FFFF0206
Security guidance equipments
: Project-Nr. FFFF0208
Detection of human beings
: Project-Nr. FFFF0211
Carcinogenic potential of aromatic amine compounds
: Project-Nr. FFFF0214
Genotoxic potential of quartz dusts
: Project-Nr. FFFF0216
APF Isocyanates
: Project-Nr. FFFF0219
Study for the Effectiveness of Skin Protecting Preparations within a Three Step Skin Protecting Plan - Risk assessment and safety measuresPart 2: Share of University Erlangen-Nürnberg
: Project-Nr. FFFF0220
Air pollution from epoxy resins
: Project-Nr. FFFF0236
Skin protection II
: Project-Nr. FFFF0243
Corpo-cranio-graphics
: Project-Nr. FFFP0213
Medical prevention of stress
: Project-Nr. FFFP0215
Car simulation in training for road safety
: Project-Nr. FFFP0218
Explosion of solvent vapour under pressure
: Project-Nr. FFFP0222
Driver's fatigue
: Project-Nr. FFFP0227
Accounting for prevention management: theoretical implication and empirical data
: Project-Nr. FFFP0230_5
Quality of prevention -subproject 9: Occupational medical attendance
: Project-Nr. FFFP0230_9
Dust-reduced electric power tools for the construction industry
: Project-Nr. FFFP0241
Safety engineering with radio frequency identification - module 1 bases
: Project-Nr. FFFP0258
Application and evaluation of a novel and objective audiometric test (transient evoked otoacoustic emissions, TEOAE) for the prevention of occupational noise induced hearing loss
: Project-Nr. FFFP0260
Experiments concerning the dust explosion risk for mixers
: Project-Nr. FFFP0261
Development of a slip resistance matrix for the selection of flooring and footwear to reduce slip-accidents
: Project-Nr. FFFP0288
Restoration of the kinematics of the knee joint after rupture of the anterior cruciate ligament by the use of computer assisted navigation systems in the ACL repair.
: Project-Nr. FFFR0098
Implementation of a screening-based algorithm for diagnosis and treatment of mental-health problems into the therapy concept of the statutory accident insurance - FAUST II
: Project-Nr. FFFR0126
Return on Prevention - ISSA
: Project-Nr. IAG420006-06
Performance of a long-term study into the effectiveness of activities conducted by OSH professionals
: Project-Nr. IAG480000
Preliminary study to the influence of the migration on the prevention activity in the DGUV
: Project-Nr. IAG480036
TAQP strategies for the integration of the preventive industrial safety
: Project-Nr. IAG480049
Evaluation of the quick check for the identification of mental stress by teaching personnel in NRW
: Project-Nr. IAG480051
Prevention campaign "Risiko raus": In 2010/2011: Evaluation of the roof campaign
: Project-Nr. IAG480054
Investigation of regional accident main focuses
: Project-Nr. IAG490002
Development of an electronic OSH information and tuition program for long-distance professional drivers
: Project-Nr. IAG490004
Evaluation of an OSH management system
: Project-Nr. IAG490010
Examination of the effects of multitasking
: Project-Nr. IAG490013
The effects of shift work: update
: Project-Nr. IAG490016
Return on Prevention - ISSA
: Project-Nr. IAG490017
Survey on the use and benefit of OSH films
: Project-Nr. IAG490018
Globalization and occupational safety and health
: Project-Nr. IAG490028
Production of a guide for companies to the application of acceptance and tolerance values for hazardous substances
: Project-Nr. IFA0020
Study of selected machinery accidents for optimization of prevention
: Project-Nr. IFA0083
Emerging risks in occupational health and safety - creation of a European network for OH&S research - NEW OSH ERA
: Project-Nr. IFA0087
Topic Centre Occupational Safety and Health 2010
: Project-Nr. IFA0092
Development of an interactive exhibit for good visibility on the roads
: Project-Nr. IFA0093
Establishing a risk observatory for the German social accident insurance institutions (RIBEO)
: Project-Nr. IFA0094
Topic Centre Occupational Safety and Health 2011
: Project-Nr. IFA0095
Topic Centre Occupational Safety and Health 2012
: Project-Nr. IFA0097
Epidemiological evidence quartz, silica, lung cancer (III), "extended follow-up" of the Chinese quartz cohort through to 2003
: Project-Nr. IFA1091
Mobile IT-supported workplaces in the catering sector: do ORDERMAN hand-held ordering terminals present a source of exposure for the employees using them?
: Project-Nr. IFA1106
Development of the GESTIS-Stoffmanager
: Project-Nr. IFA1107
Literature survey on the toxicity of the constituents of paper and paper dust
: Project-Nr. IFA1109
Review of occupational risk factors associated with osteoarthritis of the hip
: Project-Nr. IFA1110
Stresses and strains associated with mobile IT-supported work: service technicians
: Project-Nr. IFA1111
Use of on-board information and communication systems with display screens at drivers' workplaces
: Project-Nr. IFA1112
Quartz and cristobalite in raw materials and products in the ceramics industry
: Project-Nr. IFA2070
Method for measurement of aryl and alkyl phosphates
: Project-Nr. IFA2076
Analytical method for the measurement of toner particle concentrations
: Project-Nr. IFA2077
Inhalative exposure of roofers to 2-naphthylamine during hot application of tar adhesives
: Project-Nr. IFA2079
Distribution between the thoracic and inhalable particle fractions where sulphuric acid aerosols occur in working areas
: Project-Nr. IFA2080
Permeation of substance mixtures through PPE
: Project-Nr. IFA3108
NANOSH - Inflammatory and genotoxic effects of engineered nanomaterials
: Project-Nr. IFA3112
Guide to the creation of model classrooms
: Project-Nr. IFA3116
Emissions of hazardous substances from low-cost colour laser printers
: Project-Nr. IFA3117
Determination of the electrical resistance of dust samples – comparison and evaluation of different methods
: Project-Nr. IFA3119
Identification of suitable chemical protective gloves for use with oils containing PCBs
: Project-Nr. IFA3123
Separation of nanomaterials on filter media
: Project-Nr. IFA3124
Areas of application and limitations of fabric air distribution systems
: Project-Nr. IFA3125
Testing procedure for communication ear plugs
: Project-Nr. IFA4142
Emissions of optical radiation during the treatment of glass workpieces by means of gas torches
: Project-Nr. IFA4144
Protection against noise for engine drivers and engine driver/shunters
: Project-Nr. IFA4152
Measurement of the exposure of seamen to UV radiation
: Project-Nr. IFA4153
Protection against noise for engine drivers and engine driver/shunters
: Project-Nr. IFA4154
CUELA user project
: Project-Nr. IFA4155
Collection of data for simultaneous exposure to whole-body vibration and posture
: Project-Nr. IFA4157
Feasibility study into the measurement of stress upon the musculoskeletal system during the pushing and pulling of large refuse bins
: Project-Nr. IFA4161
Best-practice database for KoBRA
: Project-Nr. IFA4165
Development of the CUELA Activity Measurement System for the measurement of physical activity
: Project-Nr. IFA4166
Calibration and validation of energy expenditure measurement by means of the CUELA Activity Measurement System
: Project-Nr. IFA4167
Prevention of carpal tunnel syndrome in the Columbian floristry industry
: Project-Nr. IFA4171
Comparative ergonomic analysis conducted during the TAQP project of various techniques during the loading and unloading of aircraft
: Project-Nr. IFA4172
Further development of the techniques for the combined measurement of body posture and whole-body vibration (CUELA-GKV)
: Project-Nr. IFA4173
Comparative ergonomic analysis of different items of safety footwear in automotive manufacture
: Project-Nr. IFA4174
Measurements of masked thresholds for warning signals during work on the permanent way
: Project-Nr. IFA4176
Exposure of drivers of small roadsweepers to vibration
: Project-Nr. IFA4177
Planning aids for the acoustic design of offices
: Project-Nr. IFA4178
Prevention of musculoskeletal diseases in teachers and care staff in nursery schools and children's day-care centres
: Project-Nr. IFA4179
Intervention study of physical inactivity at office and VDU workplaces: development of a method inventory
: Project-Nr. IFA4180
Electromagnetic fields on manual medium frequency/inverter spot welding guns
: Project-Nr. IFA4183
Preparation of the "GonKatast" project data for use in investigations into cases of suspected occupational disease and in prevention activity
: Project-Nr. IFA4184
Survey of work-related knee-stressing activities in selected occupations
: Project-Nr. IFA4188
Method for evaluation of short-circuits caused by whiskers on PCBs and on electrical fuses
: Project-Nr. IFA5104
Functional safety in machine tools
: Project-Nr. IFA5106
Instrument for measuring impact forces on low-level pallet trucks
: Project-Nr. IFA5108
Validation of a system for the simulation of interactive virtual environments
: Project-Nr. IFA5110
Ergonomic design of control-room workplaces in accordance with the German regulation on VDU work
: Project-Nr. IFA5112
Development of an algometer test facility for research projects in the area of the human-machine interface
: Project-Nr. IFA5113
Pain threshold map of the human body for the specification of limit values for machine guarding
: Project-Nr. IFA5114
Protective devices employing 3D safety zones on machines: use of VR methods to monitor safety distances
: Project-Nr. IFA5116
Development and commissioning of a safety facility for the algometer test installation
: Project-Nr. IFA5121
Study on the toxicity of aluminous welding fumes in the field of the central nerve system and the airways
: Project-Nr. VMBG001
Epidemiological study relating to an increased cancer risk occurring in foundries
: Project-Nr. VMBG014
High-speed processing
: Project-Nr. VMBG015
Occupational medical examinations on the thorium substituent exposure of welders during use of thorium-free tungsten inert-gas electrodes and on their significance for health
: Project-Nr. VMBG06#016
Operational stability of fast-rotating tool basic bodies in cyclic centrifugal force load
: Project-Nr. VMBG06#018
Study with the objective to characterize the emissions generated by welding coated metal sheets in ship construction
: Project-Nr. VMBG06#019
Scientific investigation of the modification of the safety distances in the Accident Prevention Regulation "Production and processing of aluminium powder"
: Project-Nr. VMBG06#020
Development of a practical system to determine the working time of company doctors and safety specialists on the basis of the risk assessment in compliance with §§ 5 and 6 of the Occupational health law for enterprises of the VMBG
: Project-Nr. VMBG06#024
"Med 24" - Study on the cutaneous tolerance of different cleaners and on the protective effect of skin protectants
: Project-Nr. VMBG06#025
"GISMET - Testing a hazardous substances information system for the metal-working industry"
: Project-Nr. VMBG06#026